Selection notes and application experience from the projects we quote. Each article states the conditions it applies to and where the recommendation stops.
Application note8 November 2026
A pharmaceutical room is specified by its product and process first, then by the humidity band that keeps both stable. Here is how that number is set, and what changes when the same room also has to ventilate.
Read more
Application note6 November 2026
Too dry and static builds on feeders and boards; too damp and solder paste absorbs water, components pop in reflow and leakage current climbs. The working band is narrower than most halls assume.
Read more
Selection guide5 November 2026
Floor area is the number most warehouse enquiries lead with, and the least useful one. Volume and air changes give the load that the machine actually has to remove.
Read more
Service note3 November 2026
A rotor does not wear the way a coil does, but filters, seals and reactivation temperature decide whether the unit still removes what the rating plate says.
Read moreSelection guide28 October 2026
Room volume alone does not decide a dehumidifier. Start from how much water enters the space every hour, then convert that figure into a unit that can remove it at the working condition.
Read moreTechnology14 October 2026
A condensing unit is efficient down to a certain humidity and then falls away. A rotor keeps drying below that point, and runs in cold rooms where coils ice up. The dividing line is the dew point you must hold.
Read more
Application30 September 2026
Basement car parks combine large slabs, vehicle traffic and constant infiltration. Concealed ceiling units keep the equipment out of the way, but the air path decides whether they work.
Read more
Application16 September 2026
In a room held at -18 °C or even +2 °C, a condensing coil ices before it dries. A desiccant rotor removes moisture without a defrost cycle, which is why cold chain projects specify it.
Read more
Application2 September 2026
A sealed building with mechanical ventilation brings in outdoor moisture all day. Treating that air before it enters is often cheaper than drying the whole room afterwards.
Read moreApplication19 August 2026
Paper changes dimension with humidity. In a press hall the working band is narrow, and both drying and humidifying may be needed in the same week.
Read more
Technology5 August 2026
Ultrasonic humidifiers produce a fine mist without heating water. That makes them quick to respond and easy to zone, provided the water quality and drainage are handled.
Read moreSelection guide22 July 2026
A test room that must hold 23 ± 1 °C and 50 ± 5% RH needs four functions in one unit, and a specification that says which band is controlled and how tightly.
Read moreSend the room details and we will answer with the platform, the capacity at the design point and the items to confirm before an order.
